*-KEY-
EXPECTED TEMPERATURES
Above +15F
+40 to -15F
+40 to -65F
LUBRICANTS
CAPACITY
(Above -9C)
(+4 to 26C)
(+4 to -54C)
INTERVALS
OHT - Lubricating
Fluid,
Petroleum
Intervals
Base
ALL TEMPERATURES
given are
- Hydraulic
1 1/2 qts.
in hours
Control
(1.4L)
Valve
of normal
operation
GAA
Grease,
Automotive
ALL TEMPERATURES
and Artillery
*See Note 2 for lubricant specification number.
NOTES:
1.
FOR OPERATION OF EQUIPMENT IN
PROTRACTED COLD TEMPERATURES BELOW -
150F (-260C). Remove lubricants prescribed in Key for
Copy of this Lubrication Order will remain with the
temperatures above -150F (-260C). Relubricate with
equipment at all times, instructions contained herein are
lubricants specified in Key for temperatures below -150F
mandatory.
(-260C). If OEA lubricant is required to meet the
temperature ranges prescribed in the Key, OEA
By order of the Secretary of the Army:
lubricant is to be used in place of OEIHDO-10 lubricant
for all temperature ranges where OE/HDO-10 is
specified in the Key.
JOHN A. WICKHAM, JR.
General, United States Army
Chief of Staff
2.
LUBRICANTS. The following is a list of lubricants
with military symbols and applicable specification
numbers.
OFFICIAL:
OE/HDO
MIL-L-2104
ROBERT M. JOYCE
GAA
MIL-G-10924
Major General, United States Army
OEA
MIL-L-46167
The Adjutant General
OHT
MIL-H-6083
(SD), Type II
P-D-680
DISTRIBUTION:
To be distributed in accordance with DA Form 12-25B,
Operator and Organizational maintenance require-
ments for Pile Driver Hammer.
TA 219658
LO 5-3895-265-12
* GPO : 1993 0 - 342-022 (80340) : QL 3
CARD 3 OF 3