Appendix B
OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B - BEFORE D - DURING A - AFTER W - WEEKLY M - MONTHLY
INTERVAL
ITEM
NO
B
D
A
W
M
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED,
FILLED, OR ADJUSTED AS NEEDED
EQUIPMENT IS NOT
READY/AVAILABLE IF:
1.
2.
NOTE: PERFORM WEEKLY AS WELL AS BEFORE PMCS IF:
A. YOU ARE THE ASSIGNED OPERATOR BUT HAVE NOT OPERATED THE EQUIPMENT
DURING THE PAST WEEK.
B. YOU ARE OPERATING THE EQUIPMENT FOR THE FIRST TIME.
NOTE: ASSURE ALL THE LUBRICATION REQUIREMENTS ARE PERFORMED ON THE
LEADS AND HAMMER, PILE DRIVER AS DIRECTED BY THE OPERATOR’S
MANUAL (COMMERCIAL) AND THE LUBRICATION CHART (APPENDIX H).
GENERAL: Make the following walk around checks:
A. Visually check for loose wiring and damaged hoses.
B. Look for evidence of fluid leakage.
C. Look for loose or missing bolts.
Drive Caps
A. Check for cracked or damaged cushions/anvil.
B. Check for crushed, split, frayed or damaged cable.
NOTE:
HAMMER MUST BE IN AN ERECT POSITION TO CHECK/FILL OIL OR FUEL.
Any Class III leak
3 or more lead guide.
Bolts missing or won’t
tighten.
Cracked cushion/anvil,
helmet or caps.
Cable crushed, or
more than 1 winding cut.
