TM 5-3895-363-13&P
APPENDIX G
KEY
LUBRICANTS
CAPACITY
OE/ – Lubricating
HDO Oil, Internal
Combustion
Engine, Tac-
tical Service
OEA – Lubricating
Oil, Internal
Combustion,
Arctic
INTERVALS
Intervals
given are
in hours
of normal
operation
unless
otherwise
specified
– Lubrication
Tank
3 1/2 qts
(3.3L)
TRC – High-Temp
Grease
GAA – Grease, CW-11
Automotive
and Artillery
EXPECTED TEMPERATURES
Above + 60°F
+ 59° to 15°F
- 14° to - 65°F
(Above + 15°C)
(+ 15° to 25°C)
(-25° to -65°C)
OE 50
OE 30
OEA
(see note 3)
ALL TEMPERATURES
ALL TEMPERATURES
* See Notes for lubricant specification number
NOTES
1. Grease fittings on the upper cylinder are to be lubricated only when driving batter piles in
intervals of 2 hours of driving time. Batter piles are defined as piles driven on an angle, 4-5
strokes of the grease gun.
2. Everytime fuel is added, check the oil and refill to the bottom of the filler plug hole.
Fill fuel
and oil tanks prior to daily operation. The fuel will last approximately 5 1/2 hours of continuous
operation.
3. Use 50W motor oil (OE) in temperatures of + 59°F to - 15°F(+ 15° to - 25°C). Above 60°F(+ 15°C). use
30W motor oil (OE). Use OEA below - 15°F(-25°C) in place of OE/HDO 10.
4. Check before operation and when the equipment is shut down. Lube is needed, 4-5
strokes of the grease gun.
G-3/G-4 (Blank)
