(2) Oil filter.
Starting fluid tank --------------------------- 4 oz.
Hydraulic control system --------------------- 3 pt.
Manufacturer
---------------------------------Link-Belt
Speeder
Model (SN 180M501 through 180M 5Z1033
(11) Dimensions and weights.
629).
Shipping cube
Model (SN 180M2661 through 180M 13H201
(SN 180M501 through 180M629)---- 64 cu. ft.
2122).
(SN 180M2001 through 180M
139 cu. ft.
(3) Oil pump.
2122).
Height (SN 180M501 through 180M 147 5/16 in.
Manufacturer ---------------------------------Link-Belt Speeder
629).
Model (SN 180M501 through 180M 5Z120
(including driving head and
629).
adapter).
Model (SN 180M2001 through 180M 6Z590
(SN 180M2001 through 180M 180 in.
2122).
2122).
(4) Fuel filter.
in.
Width (SN 180M501 through 180M
629).
Manufacturer----------------------------------Link-Belt
Speeder
(including guide angles)
Model (SN 180M501 through 180M 5Z1031
(SN 180M2001 through
36 in.
629).
180M2122).
Model (SN 180M2001 through 180M 13H198
Depth (SN 180M501 through 180M 28 in.
2122).
629).
(5) Fuel pump.
(including driving head)
Manufacturer---------------------------------- Link-belt Speeder
(SN 180M2001 through
37 in.
7Z463
Model-------------------------------------------
180M2122).
Weight (SN 180M501 through 180M 5660 lbs.
(6) Fuel injector.
629).
Manufacturer
----------------------------------Link-Belt
Speeder
(including driving head, adap-
Model -------------------------------------------- 7Z511
ter, and guide angles).
(7) Hydraulic transmitter.
(SN 180M2001 through
6500 lbs.
180M2122).
Manufacturer-------------------------------------Link-Belt
Speeder
(12) Nut and bolt torque data.
Model (SN 180M501 through 180M 5Z1315
629).
Upper-lower cylinder tie studs ---------------- 220 ft-lb
Model (SN 180M2001 through 180M 13J45
Upper-lower cylinder nuts --------------------- 185 ft-lb
2122).
Cylinder head cap screws ---------------------- 220 ft-lb
(8) Hydraulic double relief valve.
Fuel tank cap screws ------------------------ 150 ft-lb
Anvil guide nuts -------------------------------- 40 ft-lb
Manufacturer-------------------------------------Link-Belt
Speeder
Starting device cover studs ------------------ 220 ft-lb
Model (SN 180M501 through 180M 5Z989
Starting device cover lock nuts -------------- 185 ft-lb
629).
Pump drive capscrews ----------------------- 210 ft-lb
Model (SN 180M2001 through 180M 13550
Injector cover capscrews --------------------- 40 ft-lb
2122).
Injector acorn nut ------------------------------ 60 ft-lb
(9) Hydraulic receiver.
Injector capscrews ---------------------------- 40 ft-lb
Injector ferrule ------------------------------75 ft-lb
Manufacturer------------------------------------ Link-Belt
Speeder
Fuel pump cap screws -----------------------Turn of the nut
Model (SN 180M501 through 180M 5Z973
method (hand
629).
tight plus
Model (SN 180M2001 through 180M 13554
turn)
2122).
(10) Capacities.
1-5. Differences in Models
Fuel oil tank
This manual covers only the Link-Belt Speeder
(SN 180M501 through 180M629) ----6.5 gal
Model 180M, Serial Nos. 180M501 through
(SN 180M2001 through 180M
5.5 gal
2122).
180M629, and 180M2001 through 180M2122
Lubrication oil system
inclusive. Any difference between serial number
(SN 180M501 through 180M629) --- 2.1 gal
ranges are thoroughly discussed throughout the
(SN 180M2001 through 180M
1.9 gal
manual.
2122).
1-4
