(2) Inspect all parts for cracks, breaks, and
other damage. Replace a damaged or defective
part.
3-15. Oil Filter
Refer to paragraph 3-9 to remove and install the
oil filter.
3-16. Oil Pump
a. Removal and Installation. Refer to figure
b. Cleaning and Inspection.
(1) Clean with an approved cleaning solvent
and dry thoroughly.
(2) Inspect for cracks, breaks, or other dam-
age. Replace a damaged pump.
Figure 3-6. Lubricating oil Lines and pump,
removal and installation.
Figure 3-7. Fuel lines, fuel tank, fuel pump, and fuel pump drive housing, removal and installation.
Section VII. FUEL SYSTEM
b. A high pressure fuel lines delivers the fuel
3-17. General
from the fuel pump to the nozzle assembly. When
a. The fuel system consists of the tank, fuel
the fuel pressure reaches the pop-off setting of
lines, fuel filter, fuel pump, and nozzle. Fuel is
the nozzle assembly, fuel is introduced in atom-
supplied to the fuel injection pump by gravity
ized form into a spherical shaped combustion
chamber in the anvil.
flow through a filter and hose from the fuel tank.
3-6
